SDCHENXUAN PRODUCTS
SIEMENS PRODUCTS
HONEYWELL PRODUCTS
DANFOSS PRODUCTS
ABB PRODUCTS
REGIN PRODUCTS
RDG160KN
Room thermostat with KNX communications, AC 24 V, for fan coil units and universal applications, heat pump, fan (1-/ 3-speed, DC), valves (2-point, DC)
- KNX communications
- For applications with DC control outputs and DC or 3-speed fan output
- For applications with 2-position control output with DC fan output
- 3 multifunctional inputs for keycard contact, external room / return air temperature (QAH11.1, QAA32), heat / cool changeover, operation mode changeover, window contact on/off, dewpoint monitor, electrical heater enabled, fault contact, presence detector
- Operating modes: Comfort, Economy and Protection
- Automatic or manual EC fan or 1-/3-speed
- Automatic or manual heating / cooling changeover
- Adjustable commissioning and control parameters
- Minimum and maximum setpoint limitation
- Backlit display
- Master / Slave function in KNX S-mode
Application selectable:
- 2-pipe system
- 2-pipe system with electrical heater
- 2-pipe system and radiator / floor heating
- 4-pipe system
- 2-stage heating or cooling system
- Heating / cooling with 6-port ball valves
Technical specifications
Operating voltage |
AC 24 V |
Power consumption |
2 VA; 2 W |
Setpoint setting range |
5…40 °C |
Switching differential |
Heating: 0.5…6 K; Cooling: 0.5…6 K |
Communication |
Bus: KNX (S-Mode und LTE-Mode mit Synco 700) |
Analog inputs, number |
2 |
Analog outputs |
Valve, el. heater: 2; Fan: 1 (ECM) |
Analog outputs, number |
3 |
Analog output, signal |
DC 0...10 V |
Analog output, current |
1 mA |
Digital inputs, number |
1 |
Relay outputs |
Valve, compressor or el. heater: 2 outputs, 2-position; Fan: 1- or 3-speed |
Relay outputs, number |
3 |
Relay output, switching voltage |
AC 24…230 V |
Relay output, switching current |
5 (4) A |
Type of fixing |
Wall mounting with screws |
Degree of protection |
IP30 |
Dimensions (W x H x D) |
93 x 128 x 30.8 mm |
Data sheet |
N3191 |