RDG100KN - Room thermostat with KNX communications, AC 230 V, for fan coil units and universal applications

RDG100KN - Room thermostat with KNX communications, AC 230 V, for fan coil units and universal application

KNX communications
3 multifunctional inputs for keycard contact, external room / return air temperature (QAH11.1, QAA32), heat / cool changeover, operation mode changeover, window contact on/off, dewpoint monitor, electrical heater enabled, fault contact
Operating modes: Comfort, Economy and Protection
2-position, 3-position or PWM control outputs
Automatic or manual fan speed for 1-speed, 3-speed fan
Automatic or manual heating / cooling changeover
Adjustable commissioning and control parameters
Minimum and maximum setpoint limitation
Backlit display

Application selectable:

Technical specifications

Operating voltage	AC 230 V
Power consumption	8 VA; 1 W
Setpoint setting range	5…40 °C
Switching differential	Heating: 0.5…6 K; Cooling: 0.5…6 K
Communication	Bus: KNX (S-Mode und LTE-Mode mit Synco 700)
Analog inputs, number	2
Digital inputs, number	1
Relay outputs	Fan: 1- or 3-speed
Relay outputs, number	3
Relay output, switching voltage	230 V
Relay output, switching current	5 (4) A
Triac outputs	Valve, el. heater; 2-position, PWM, 3-position
Triac outputs, number	3
Triac output, switching voltage	230 V
Triac output, switching current	1 A
Type of fixing	Wall mounting with screws
Degree of protection	IP30
Dimensions (W x H x D)	93 x 128 x 30.8 mm
Data sheet	N3191